Baxiroca Silicone Heater Membrane 005698660

✅ These are the 7 most common faults in your boiler and this is how they are repaired Every winter the soups, the chunky socks, the endless scarves and, oh yes, the roar of boilers at full blast come back to keep you safe from the cold.

✅ These months are the acid test for most of them, having spent the whole spring and summer hibernating.

✅ Saving energy, but also accumulating dust, blockages and hidden faults.

✅ When this Indian summer is over and it is time to switch on the heating, remember our teachings, young Padawan, and make us proud of you: First, carry out an initial check of your boiler It will take you less than a minute, and it will help you confirm that everything seems fine and it is ready to get back into action.

✅ The most common problems in domestic boilers In this other post we explained how to diagnose a fault in your boiler, based on the symptoms you notice day to day.

✅ The most frequent thing is that we hear rubbing noises in the system, which point directly to a pump fault.

✅ If so, this part will have to be repaired or replaced, for which you will need a specialist technician.

✅ If you hear dripping at the bottom of the appliance, it may be a broken safety valve, or the points where this device connects to the fitting: Pressure drops Are another problem that tends to appear over time: it means the hot water and the heating heat disappear.

✅ It is not due to a fault, but rather to a minor imbalance that you can fix yourself.

✅ To get everything working properly again, fill the circuit to the pressure recommended by your boiler manufacturer -generally up to 1,5kgs on the pressure gauge- in the way we showed you in this previous post.

✅ Another common problem is a blockage in the flue outlet The quickest way to detect it is by looking at the boiler's electronic panel: an error, which you can interpret using the appliance's instruction manual, will block its ignition to protect the home, as it is a serious problem: the carbon monoxide generated by its operation has to be evacuated through the chimney or exhaust duct, and this is not happening effectively.

✅ Several causes can produce this blockage, so it is best to call a specialist boiler technician to inspect it and find the fault.

✅ The heating circulation pump gets blocked Do you know when you switch on the heating the temperature rises straight away, but then suddenly it switches off?

✅ Everything points to this component of your boiler, which has some problem.

✅ And it is complicated enough to diagnose that you should call a specialist to examine it for you.

✅ A problem we looked at in the initial video that we invite you to watch to get your boiler ready is detecting a cut in the gas supply.

✅ It may be due to a fault, to a valve closed without you noticing, or to a supply cut by your gas provider.Another very common fault is the temperature sensor, responsible for detecting whether the water is hot or not in order to give the order to heat more water.

✅ If this part fails, it may think all the water is at the perfect temperature and not order more heat to be produced, so you will need a specialist technician to replace it.