Red Luminous Single Pole Switch 16A 250V Standard

✅ Red double-pole switch, with pilot light.

✅ Voltage: 16(4)A 250V. max. temperature 120°C Drilling template 11x30 mm Compatible models: COOKMAX, ROLLER GRILL. C.O. A0712 CHANGE DISHWASHER SWITCH BUTTON Disconnect the power supply to the dishwasher by turning the main switch to \"No\" in the electrical switch box.

✅ Open the dishwasher door and locate the Torx screws along the top of the dishwasher door to gain access to the control panel.

✅ Loosen the two screws at the top of the door and the two screws on the side of the top panel.

✅ Use a Torx screwdriver to remove the screws.

✅ Lift the door as if closing it, then lift the control panel cover and pull it away from the door.

✅ It will not come off completely while the wires are still connected.

✅ Disconnect the wires and the ribbon cable going to the control console board by pulling them out of the console.

✅ The control console board runs along the dishwasher and includes the buttons and the control panel board.

✅ Press the tabs located on the sides of the control console board with a flat-head screwdriver. ?Pull the control console board out of the door.

✅ Insert the new control console board and push down until the tabs snap into place.

✅ Reconnect the wires and ribbon cable of the dishwasher, pushing them back into place.

✅ Reverse the steps to screw the control console board back into place on the dishwasher door.: ROLLER GRILL Hot display BMV 2, BMV 3, WD 100, WD 200, WDL 100, WDL 200 ROLLER GRILL Pizza oven PZ 330, PZ 400, PZ 660.