3 Bottles Gas Gas D2 226G Alternative R12, R134A Freeze Organic

Ref. IB16UN1174x3
Price: €105.82
No tax
Product availability: Ships in 24/48 h
Delivery in 2-7 working days
Share

✅ Get your fridge, freezer or car air conditioning cooling again.

✅ Gasica D2 DETECTS and SEALS MICRO-LEAKS that your AC system may have. For larger leaks, make sure you have repaired them before recharging your air conditioning. You will be able to detect the leak thanks to the greenish pigment you will see coming out of the leak in your air conditioner, freezer or fridge.

✅ Alternative to R12 and R134A gases. These are the ones commonly used in car air conditioning systems and in fridges and freezers. However, you must know which gas your machine uses.

✅ Contains one 226g bottle of Gasica D2. Equivalents: 680g - R12 and 590g - R134A. For the rest, calculate approx. 40% of the current charge of the unit.

✅ [ADVANTAGES] It is an ecological Isobutane R600a gas, so it does not harm the environment and no installer licence is needed to handle it. Lower electricity consumption, saving approx. up to 30% and a smaller amount of gas needed for correct operation. In addition, since the molecules in its composition are larger than those of conventional refrigerant, fewer leaks occur in the refrigeration circuit.

Gas Refrigerant Gas 226Gr. For Systems With R134A - R12. It Is A New Isobutane R600A Ecological Gas, Based On The North American Eco-Technology Sumgas. Its Hydrocarbon Formula (Hc) Does Not Contain Chlorinated Products, Fluorinated Products Or Other Toxic And Polluting Components, So It Is Guaranteed That Its Use Does Not Produce Pollution And It Is Classified As Isobutane R600A Ecological Gas. Its Pure Hydrocarbon Components Carry Out An Extra Cleaning Of Dirt Produced By The Decomposition Of Degraded Gases In The Circuit, It Helps The Regeneration Of These Decomposed Components Without Causing Blockages In The System. It Is Compatible With Most Chlorofluorinated Gases. Equivalences: 680Gr - R12590Gr - R134A Directions For Use: 1.- Make Sure That The Compressor Is Turned Off. 2.-If You Need To Check For Leaks, Recover The Existing Refrigerant Gas In A Container And Make The Relevant Checks 3.- Connect The Hose With The Compressor Always Off At The Low Pressure Charging Port. * Warning: To Puncture The Bottle You Need The Compatible Key, Make Sure That The Drilling Tip Of The Key Is As High As Possible To Screw It Into The Bottle, Once Well Screwed And With The Hose Connected You Can Hit The Faucet Of The Key. 4.- Install The New Product, Inverting The Can Or Can. 5.- After©Completing The Minimum Load, Test The System And Make Sure There Are No Leaks. 6.- In Case Everything Works Correctly, Turn On The Compressor And ±Add Refrigerant To Achieve The Correct Pressure.

  • Brand
  • Ref. IB16UN1174x3
  • Reference
    IB16UN1174x3

4 other products in the same category

Loading...
Back to top