Abocardador Excentrico Cono 45 Alta Calidad 1/4 - 3/4

Eccentric Ratchet Flarer Cone 45 Degrees 1/4 3/8 1/2 5/8 3/4

Name: Eccentric Ratchet Flarer Cone 45 Degrees 1/4 3/8 1/2 5/8 3/4
Brand: STANDARD
SKU: IB16UN1131
Price: 111.2144 EUR
Availability: InStock

STANDARD

Ref. IB16UN1131 EAN 8435576619615

€111.21

No tax

Ships in 24/48 h

Delivery in 2-7 working days

✅ Functionality: Tool for flaring tubes in installations that require tubing, such as an air conditioning or heating installation, in flaring sizes from 1/4", 5/16", 3/8", 1/2", 5/8", 3/4".

✅ Features: The tool consists of 3 parts; the ratchet handle clutch releases automatically when the flare is complete. A screw with a handle, at the end of which is the expander, a bar with different flaring sizes for tubes and a bar that is used on the screw in order to make it turn and penetrate, shaping the tube.

✅ Material: High-quality, strong chrome-plated steel. With materials tested to last over time and make installing refrigeration equipment easier.

✅ Directions: hand tool used to widen the ends of a tube or pipe in order to make it easier to join with another tube or pipe; thanks to its quality, design and materials, our flaring tool ensures that this joint is leak-tight to avoid losses.

✅ Use: for making single or double flares in thin-walled copper, brass and aluminium tubes, and recommended for installers, plumbers, mechanic workshops and metalworking industries.

What© Do We Do When We Flare? When We Flare, We Simply Conically Widen The End Of A Tube. It Is A Tool That Does Not Require Excessive Dexterity, As It Is Easy To Use. Generally, The Flaring Is Made Up Of Three Main Components: A Metal Bar With Entrenched Holes Where They Fit Pipes Of Different Sizes±, A Screw With A Handle That Goes Into The Mouth Of The Tube And A Metal Arch Where The Handle Fits And Allows Rotation. The Metal Parts Of The Flaring Machine Are Made Of Chrome-Plated Stainless Steel, Which Makes Them Resistant To Rust And Corrosion, And Ensures A Good-Looking Finish. How To Use A Flar? First Of All, The End Of The Tube Must Be Cleaned And All The Impurities That It May Have Must Be Removed Subsequently, We Must Know The Size Of The Tube To Know Which© Hole Of The Metal Bar We Should Use We Must Place This Bar In The Hole That Is Under The Screw, Tighten The Arch So That The Bar Is Well Held And We Can Turn The Key Without Any Problem Finally, We Have To Insert The End Of The Tube Into The Hole To Finally Turn The Screw And Impinge With The Cone In The Tube. Hole Size±: 1/4 Inch 5/16 Inch 3/8 Inch 1/2 Inch 5/8 Inch 3/4 Inch