Airnet + Airpur Odor Eliminator Cleaner Air Conditioning Systems

Properties:

AIRPUR® is an effective treatment for eliminating bad odours. It is bactericidal and fungicidal. Its high efficacy makes it an essential product for all air conduction systems, preventing the proliferation of bacteria, fungi and microorganisms, as the main causes of diseases and contagion.

Applications:

It is used as a bactericide and fungicide for air conditioning circuit systems.

Environmental use: Especially suitable for use in the food industry. Application exclusively by specialised personnel. Commercial and industrial refrigeration, cold storage chambers for fruit and vegetables, cold display units, refrigerated food lorries, automotive, drainage of circuits and refrigeration in general (domestic and collective).

Instructions for use:

Spray directly onto areas that are sources of bad odour, bacteria, fungi, etc. It is advisable to treat air conditioning units beforehand with our AIRNET® Disinfectant cleaning product. Once the circuit is clean, apply AIRPUR® by spraying until saturation and with the equipment running for good product distribution.

Do not spray on electrical or electronic areas.

Dosage:

Should be used undiluted. In air conditioning units spray the front and upper area of the split where the air circulates (until saturation). For air ducts spray through the system return for product distribution through all ducts.

Authorised by the General Directorate of Public Health of the Ministry of Health. Registration number: D.G.S.P. 13-20/40-06768 HA UNE-EN 13697

Physical properties:

Appearance Liquid

Colour Yellowish

Odour Slightly perfumed

Density Min. 0.939 / Max. 0.958 pH 100% 4.68

Qualitative composition:

- Metal oleates

- Quaternary ammonium salts

- Alcohol

- Lactic acid

- Distilled water

Properties:

AIRNET® Spray. It is an air conditioning refrigerant circuit cleaning product based on polyalcohol solvents and anticorrosive inhibitors. Useful for removing all types of persistent dirt. Due to its great cleaning power, it removes without requiring mechanical effort and aggressive products, dirt accumulations produced by air flow, nicotine, dust, etc. Its cleaning nature ensures that bad odours do not proliferate.

Applications:

AIRNET® Spray. It is used for cleaning air conditioning systems and circuits. For external cleaning of splits, fan-coils, indoor unit, filter cleaning, etc. Applicable to cleaning any type of surface not damaged by water. Spray the front and upper area of the split where the air circulates. Run the system to distribute AIRNET® Spray through all ducts. Allow to act until fully impregnated. Leave the equipment running for 10-15 minutes. Following this it is advisable to spray our hygienising odour eliminator AIRPUR® Spray.

Instructions for use:

In air conditioning units spray the front and upper area of the split where the air circulates (until saturation), at a distance of 15 / 20 cm.

Do not spray on electrical or electronic areas.

Physical properties:

Appearance-Aerosol

Colour-Green

Odour-Pine

Weight Min. 451 g / Max. 460 g pH 100% - 9.5 - 10

Qualitative composition:

- Non-ionic surfactants

- Cationic surfactants