Fagor 1L114S Washing Machine Door Rubber L21B010C6

✅ How to change the door gasket of a washing machine The washing machine has become an indispensable item in our homes although, because of use, sometimes one of its parts can break down.

✅ In this Bricopedia you will learn how to change the door gasket of a washing machine to keep it in perfect condition, a repair you can do yourself at home. How to change the door gasket of a washing machine?

✅ To change the door gasket of a washing machine you will need the following materials.

✅ 1.New gasket for the replacement.

✅ 2.Adjustable wrench.

✅ 3.Screwdriver One of the most important things is to pay close attention to the steps when removing the gasket and to how it is fitted, since you then have to do exactly the same in reverse with the new gasket.

✅ This will make the job much easier and save us time. 1.

✅ Remove the retaining clamp.

✅ Inside the groove of the gasket is this clamp, which stops the gasket from moving.

✅ The first thing is, using a screwdriver as a lever, to pull the clamp out of its groove. 2.

✅ Release the gasket.

✅ Take off the gasket and push it inwards into the drum to make the next step easier. 3.

✅ Locate the inner clamp.

✅ Feel with your hand for where the clamp is fitted, which in this case is like a spring so that it fits the door opening.

✅ It has a nut that you will have to unscrew with the help of the adjustable wrench.

✅ For better access, you can push the drum inwards to have more room to get your hand and the adjustable wrench in. 4.

✅ Remove the clamp.

✅ When the clamp is loose, pry it and you will see it comes out easily. 5.

✅ Remove the gasket.

✅ Just pull it outwards, since the clamps have been removed and they are the only thing holding the gasket to the washing machine.6.

✅ Clean the opening.

✅ Take the opportunity to clean with a damp cloth the opening where the gasket was fitted. 7.

✅ Fit the new gasket.

✅ The same operation has to be done in reverse.

✅ Find the holes to align the gasket. 8.

✅ Align the water outlet.

✅ The gasket has three holes through which the water drains.

✅ These will help us place the gasket in its correct position, as they will serve as a reference.

✅ For this, the gasket has a groove that fits perfectly with the curve of the metal of the door opening. 9.

✅ Fit the gasket.

✅ Once you have fitted the gasket, push it towards the drum as you did before to make the job easier.

✅ Fit the fold of the gasket by pulling it until it goes into the groove of the metal, and push with your fingers. 10.

✅ Check that the gasket is in the correct position.

✅ Put the gasket back correctly and make sure everything is fitted.

✅ Once the holes are where they should be, and the gasket is fitted in the metal groove, push the gasket back into the drum. 11.

✅ Fit the inner clamp.

✅ Do exactly the same as when you removed it.

✅ Use the wrench to tighten the screw until it is firm. 12.

✅ Fit the outer clamp.

✅ For the last time, pull the gasket towards you and now fit it into the outer groove where the clamp goes, as you did when you removed it.

✅ Fit the clamp using the screwdriver as a lever, taking care not to damage the new gasket, and your washing machine is ready for the laundry. The washing machine is an appliance used every day, so it suffers a lot of wear.

✅ There are many types of faults, but we hope that with these tips you can carry out the maintenance, in this case of the gasket, which usually has to be replaced.